新闻中心

EEPW首页 > 测试测量 > 业界动态 > 通富微电基板类封装

通富微电基板类封装

作者:时间:2022-04-18来源:通富微电收藏

Bump Series


Production Overview

本文引用地址:http://www.eepw.com.cn/article/202204/433190.htm

        TFME is able to provide Solder bump, Cu pillar bump and Gold bump for customer to meet different requirement.

Feature

                 Solder bump                                                          Cu pillar bump                                                          Gold bump

                - Wafer size: 8 inch / 12 inch                                    - Wafer size: 8 inch / 12 inch                                        - Wafer size: 8 inch / 12 inch

                - Bump qty: 2892(MAX)                                       - Bump qty:  1500 pin (max)                                         - Bump qty: 4091/pin (max)
                - Structure: 0P1M~2P2M                                         - Structure: 0P1M~1P2M                                              - Structure: 0P1M~1P1M

                - Body size:  0.7*0.76~10.7*10.7 mm                       - Body size:  1.0*1.5~10*10mm                                    - Structure: 0P1M~1P1M 


                - RDL L/S: min.5um/5um                                          - RDL  L/S: min. 5um/5um                                            - Bump L/S: min.10um/8um 


Process Capability & Design Rule

Solder bump & Cu pillar




Process Capability & Design Rule

Gold bump



Reliability Test Standards

Solder bump & Cu Pillar bump

Gold bump


Shipment Packing


WLCSP Series



Production Overview
        TFME offers  various Wafer Level CSP product to customer including Fan in type and Fan out type.

Feature

          Fan in WLCSP                                                                                                                                         Fan out WLCSP
         - Ball count : 2~309                                                                                                                              - Ball count : 36 ~203 

         - Structure: 1P1M~2P2M                                                                                                                     - Structure: 1P1M~3P3M

         - Body size:  0.6*0.3~7.6*7.6mm                                                                                                          - Body size: max 20*20mm
         - RDL L/S: min.5um/5um                                                                                                                      - RDL L/S: min.2um/2um


Process Capability & Design Rule
Fan in WLCSP


Process Capability & Design Rule

Fan out WLCSP



Reliability Test Standards


Shipment Packing




COGCOF Series


Production Overview

    TFME is able to provide COG (Chip On Glass) and COF (Chip On Film) services for gold bump drive IC based on customer requirement.  

    


Process Capability & Design Rule

COG



Process Capability & Design Rule

    COF


Reliability Test Standards
 


Shipment Packing



FCBGAFCLGA Series



Production Overview 
Flip Chip interconnection, also knownas Controlled Collapse Chip Connection, C4, has been identified as a high performance packaging solution to meet the growing need for products with increased electrical performance, high I/O, and high system reliability as a replacement for conventional wire bond process. Utilizing whole die area as for electrical connection, substrate I/O per unit exponentially increased vs. perimeter wire interconnection technology. 
Flip chip interconnect also allows direct connection with on-die power planes which enables increased electrical performance including increased switching speed and more efficient power distribution to the IC performance at lower operating voltages. 

TF-AMD Flip Chip are assembled with single unit laminate which is the highest routing density through build-up technology to maximize the device performance &conventional ceramic substrate for reliability enhanced package solution. Combined with Flip Chip interconnection, TF-AMD provides optimal design flexibility for final package design& product format to fit an end user requirement. TF-AMD offers Flip Chip BGA packages with ball counts up to 3000 & PGA package up to 2000

Application 
Flip Chippackage is considered one of the most established industry platform applicable for high pincount and/or high performance ASICs. Large body FC BGA/PGAs provide package solution forComputing (microprocessors / graphic, server), gaming,high bandwidth networking/Communicationdevices. Combined with Flip Chip technology &BGA/PGAlead format, TF-AMD help to enable SMT and also pin insertion application.

Features 
Flip Chip BGA/PGA Packaging 
Package Types: Bare die, Stiffener, Lidded (Top hat & flat top) 


Wafer Node ³14/16nm ELK(extreme low K) qualified, 7nm in development. 
Package sizes from 12mm to 55mm (75mm in development) 
Die area up to 800mm^2 

Lead Free, Eutectic, High-Pb bump for Flip Chip connection 
Passive component size down to 01005 
High thermal performance solution using Indium metal TIM 


Substrate 
               o    4 – 18 layers laminate build up 
               o    Coreless, 0.2mm, 0.4mm, 0.8mm, 1.0mm available 
               o    High CTE ceramic / LTCC alumina ceramic 
               o    BGA / PGA 


Footprints Pitch 
                o    BGA : 0.5mm, 0.65mm, 0.8mm and 1.0mm 
                o    PGA : 1.0mm, 1.27mm 

Other Option 
                o    Multi-die capability 
                o    Die binning to waffle pack up to 256 BINs 

Flip Chip BGA/PGA Test 
Test Product Engineering 
                o    TF-AMD test provides a competitive test solution to our customers ranging from test development, platform conversion, and product maintenance and test data analysis. 
                o    The team has rich test development experience of various product portfolio, including high-end digital, mix-signal, SOC and high speed products. 

Adding Value to Customer 
                o    Reduce customer overhead by outsourcing projects / tasks to avoid maintaining a large scale of dedicated team 
                o    Incorporate industrial standard through leveraging best known method from our database & continuous cost saving by driving test time reduction, yield improvement 

Service Solutions 
                 o    Wafer Sort test development 
                 o    Final Test development 
                 o    Low cost platform conversion 
                 o    Multi-site enablement 
                 o    Burn-in capabilities 

Test Development Experience 
                 o    CPU, APU, GPU 
                 o    Chipset 
                 o    Digital Audio 
                 o    Baseband 
                 o    Microcontroller 
                 o    LCD Driver 
                 o    Touch Panel Driver 

ATE platforms and products 


Reliability Test Standards 


Design Rule 
Top Hat Single Piece Lid 


Lid size=substrate size-0.2mm 

Standard foot sizes 
                        o    2mm for 15-25mm body 
                        o    3mm for 27-31mm body 
                        o    4mm for 33-50mm body 

Max 3mm on all four sides (UF will flow under the bend/slant of the HS). Extended design rule allow Max. 2.5mm for the body size ≤31mm 

Lid is centered 

Cavity depth for 12inch wafer SPL is 0.8mm and total thickness is 1.3mm 
                        o    TIM Thickness target: 40um (Max. 100um) 
                        o    Adhesive Thickness target: 120um (Max. 200um) 
                        o    Lid manufacturing tolerance: +/-50um 


Body size<31mm support bare die structure (without stiffener/lid construction) 

Packing & Shipping (in house standard) 
BGA / PGA (Tray) 




FCCSPFCLGA Series


Production Overview

        TFME offers various FCCSP and FCLGA package based on customer different requirement.



Features
- SiP (FC + SMT + Wire bond) available.
- CUF, MUF available.
- 7N/12N/14N/16N wafer node mass production
- Various substrate technology qualified including SAP, MSAP, ETS, MIS and SLP.
- Fully Turnkey for wafer bumping, probing, assembly, FT available.


Process Capability & Design Rule


Reliability Test Standards


Shipment Packing





WBBGAWBLGA Series


Production Overview

        TFME offers various WBBGA and WBLGA package based on customer different requirement.




Features
- 1.1x0.7 mm to 21x21 mm Package
- 0.2mm to 1.0mm C Mold Chase
- 01005 Components SMT
- 0.3x0.3 mm Small Die 
- 1-6 Layer Substrate


Process Capability & Design Rule


Reliability Test Standards



Shipment Packing





关键词: 封装 测试 通富微电

评论


相关推荐

技术专区

关闭