cp * ../linux-2.6.22.1/drivers/net/arm
2.vi include/asm-arm/arch-s3c2410/smdk2410.h

#define pSMDK2410_ETH_IO        __phys_to_pfn(0x19000000)

#define vSMDK2410_ETH_IO        0xE0000000

#define SMDK2410_EHT_IRQ        IRQ_EINT9

3.vi arch/arm/mach-s3c2410/mach-smdk2410.c
＃i nclude <asm/arch/smdk2410.h>

在map_desc smdk2410_iodesc[]

中添加cs8900的对于的io空间映射

static struct map_desc smdk2410_iodesc[] __initdata = {

  /* nothing here yet */

{ vSMDK2410_ETH_IO , pSMDK2410_ETH_IO, SZ_1M, MT_DEVICE },

};

4.vi drivers/net/arm/Kconfig

config  ARM_CS8900

        tristate "CS8900 support"

        depends on NET_ETHERNET && ARM && ARCH_SMDK2410

        help

            Support for CS8900A chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the Ethernet-HOWTO,available from as well as .To compile this driver as a module, choose M here and read .The module will be called cs8900.o.

5.vi drivers/net/arm/Makefile

obj-$(CONFIG_ARM_CS8900)        += cs8900.o

专栏文章内容及配图由作者撰写发布，仅供工程师学习之用，如有侵权或者其他违规问题，请联系本站处理。 联系我们