关 闭

新闻中心

EEPW首页 > 工控自动化 > 设计应用 > ST 3kW光伏电压转换解决方案

ST 3kW光伏电压转换解决方案

作者:时间:2012-05-24来源:网络收藏

EVAL-ISV002V2 是能连接到电网器开发板,包括高频绝缘输入功率部分(实现DC/DC转换)和逆变器部分(提供50Hz正弦波电流到电网),输入电压范围从200V到400V,系统输出通过LCL滤波器以230Vrms 50Hz连到电网,正常输出功率.本文介绍了EVAL-ISV002V2 主要特性,硬件方框图,控制方框图和MPPT算法方框图,以及系统指标,完整电路图和材料清单.

本文引用地址:http://www.eepw.com.cn/article/201495.htm

Interest in photovoltaic (PV) applications has grown exponentially in recent years. As PV systems require an electronic interface to be connected to the grid or standalone loads, the PV market is increasingly appealing for many power electronics manufacturers.

The EVAL-ISV002V2 demonstration board implements a conversion system for PV applications with the aim of achieving high efficiency and significant reduction in production costs. It consists of a high-frequency isolated input power section which performs the DC-DC conversion, and an inverter section capable of delivering sinusoidal current at 50 Hz to the grid.

The system operates with input voltages in the range of 200 V to 400 V, and is tied to the grid at 230 Vrms, 50 Hz, through an LCL filter.

Other unique characteristics of the proposed converter are integration level, decoupled active and reactive power control and flexibility towards the source.

A fully digital control algorithm, including power management for grid-connected operation and MPPT (maximum power point tracking) algorithm, has been implemented on a dedicated control board, equipped with a latest-generation 32-bit (STM32) microcontroller.

STEVAL-ISV002V2 主要特性:

■ DC-DC input voltage: 200 V to 400 V

■ DC-DC output voltage: 450 V

■ DC-AC output voltage: 230 Vac

■ Nominal output power: 3 kW

■ DC-AC switching frequency: 17 kHz

■ DC-DC switching frequency: 35 kHz

■ Transformer turns ratio: 1.2

■ Grid voltage: 230 Vrms +/-20%

■ Grid frequency: 50 Hz

■ Power factor: above 10%; rated power > 0.9

■ THD @ full load: 5%

■ RoHS compliant

图1.STEVAL-ISV002V2外形图

图2.STEVAL-ISV002V2硬件方框图

图3.STEVAL-ISV002V2控制方框图

图4.STEVAL-ISV002V2 MPPT算法方框图

STEVAL-ISV002V2包括:

It consists of 5 PCBs electrically connected by means of suitable connectors. The 5 PCBs are listed below and are hereafter referred to with the following nomenclature:

● Main power board

● Multi-output power supply board

● Control and signal conditioning board

● Output sensing and relay board

● Input current sensing board

STEVAL-ISV002V2系统指标:

图5.STEVAL-ISV002V2电路图:功率级

图6.STEVAL-ISV002V2电路图:输出检测和继电器板


上一页 1 2 下一页

关键词: 3kW ST 光伏 电压转换

评论


相关推荐

技术专区

关闭