新闻中心

EEPW首页 > 电源与新能源 > 设计应用 > 基于LT4180设计的精密负载调整电源方案

基于LT4180设计的精密负载调整电源方案

作者:时间:2010-05-26来源:网络收藏
是全特性控制器,集成有5mA光隔离器,欠压/过压锁住,软起动和±1%内部基准电压. 的虚拟遥测特性包括用户编程的抖动频率和扩展频谱抖动.输入电压从3.1V到50V,主要用在12V高强亮度灯,28V工业系统,大于40W的CAT5电缆系统,AC和DC适配器,井下采集和其它遥控仪表等.本文介绍了主要特性,方框图以及典型应用电路,包括12V/500mA线性稳压器电路图, 12V/600mA升压稳压器电路图和3.3V隔离反激稳压器电路图.

The LT4180 solves the problem of providing tight load regulation over long, highly resistive cables without requiring an additional pair of remote sense wires. This Virtual Remote Sense device continuously interrogates the line impedance and corrects the power supply output voltage via its feedback loop to maintain a steady voltage at the load regardless of current changes.

The LT4180 is a full-featured controller with 5mA optoisolator sink capability, under/overvoltage lockout, soft-start and a ±1% internal voltage reference. The Virtual Remote Sense feature set includes user-programmable dither frequency and optional spread spectrum dither.

The LT4180 works with any topology and type of isolated or nonisolated power supply, including DC/DC converters and adjustable linear regulators.

The LT4180 is available in a 24-pin, SSOP package.

LT4180主要特性:

Tight Load Regulation with Highly Resistive Cables without Requiring Remote Sense Wiring

Compatible with Isolated and Nonisolated Power Supplies

±1% Internal Voltage Reference

5mA Sink Current Capability

Soft-Correct Reduces Turn-On Transients

Undervoltage and Overvoltage Protection

Pin-Programmable Dither Frequency

Optional Spread Spectrum Dither

Wide VIN Range: 3.1V to 50V

24-Pin SSOP Package

LT4180应用:

12V High Intensity Lamps

28V Industrial Systems

High Power (>40 Watts) CAT5 Cable Systems

Wiring Drop Cancellation for Notebook Computer Battery Charging

AC and DC Adaptors

Well-Logging and Other Remote Instrumentation

Surveillance Equipment
隔离器相关文章:隔离器原理

上一页 1 2 下一页

评论


相关推荐

技术专区

关闭