关 闭

新闻中心

EEPW首页 > 工控自动化 > 设计应用 > 步进电机控制器电路

步进电机控制器电路

作者:时间:2010-02-09来源:网络收藏

Stepper Motor Controller

本文引用地址:http://www.eepw.com.cn/article/163273.htm

I found this circuit in my files. I don't know where it came from, but it looks like I photocopied it from somewhere years ago. I have been told that it came from The Robot Builder's Bonanza, by Gordan McComb. Anyway, I thought that it should be fairly useful, so I decided to post it here. The circuit is very simple and inexpensive. This is good thing because most commercial stepper motor controller ICs are quite expensive. This circuit is built from standard components and can easily be adapted to be controlled by a computer. If you use cheap surplus transistors and stepper motor, the price of the circuit can be kept to under $10.


Schematic

Parts


Part
Total Qty.
Description
Substitutions

R1, R2 ,R3, R4
4
1K 1/4W Resistor


D1, D2, D3, D4
4
1N4002 Silicon Diode


Q1, Q2, Q3, Q4
4
TIP31 NPN Transistor (See Notes)
TIP41, 2N3055

U1
1
4070 CMOS XOR Integrated Circuit


U2
1
4027 CMOS Flip-Flop


S1
1
SPDT Switch


MISC
1
Case, Board, Wire, Stepper Motor


Notes
1. You should be able to substitute any standard (2N3055, etc.) power transistor for Q1-Q4.

2. Every time the STEP line is pulsed, the motor moves one step.

3. S1 changes the motors direction.

DIY机械键盘相关社区:机械键盘DIY


红外遥控器相关文章:红外遥控器原理


评论


相关推荐

技术专区

关闭