GENERAL DESCRIPTION ZCC2362 is a highly integrated current mode PWM control IC optimized for high performance, low standby power and cost effective offline flyback converter applications. At full loading, the IC operates in fixed frequency(65KHz) mode. When the loading goes low, it operates in Green mode with valley switching for high power conversion efficiency. When the load is very small, the IC operates in ‘Extended Burst Mode’ to minimize the standby power loss. As a result, high conversion efficiency can be achieved in the whole loading range. VCC low startup current and low operating current contribute to a reliable power on startup and low standby design with ZCC2362. ZCC2362 offers comprehensive protection coverage with auto-recovery including Cycle-by-Cycle current limiting (OCP), over load protection(OLP), VCC under voltage lockout (UVLO), over temperature protection (OTP), and over voltage protection (OVP). Excellent EMI performance is achieved with YT proprietary frequency shuffling technique. The tone energy at below 23KHz is minimized in the design and audio noise is eliminated during operation. ZCC2362 is offered in SOT23-6 package APPLICATIONS Offline AC/DC flyback converter for ■General power supply ■Meet 75mW no load standby power standard ■Power Adapter FEATURES ■Power on soft start reducing MOSFET Vdsstress ■Multi-Mode Operation 65KHz fix frequency mode @ Full Load Valley switching operation @ Green mode Burst Mode @ Light Load & No Load ■Frequency shuffling for EMI ■Extended burst mode control for improved efficiency and low standby power design ■Audio noise free operation ■Comprehensive protection coverage VCC Under Voltage Lockout with hysteresis (UVLO) VCC Over Voltage Protection (VCC OVP) Cycle-by-cycle over current threshold setting for constant output power limiting over universal input voltage range Over Load Protection (OLP) with auto-recovery External (if NTC resistor is connected at PRT pin)or internal Over Temperature Protection (OTP) with auto-recovery Output Over Voltage Protection(Output OVP) with auto-recovery, and the OVP triggered voltage can be adjusted by the resistor connected between auxiliary winding and PRT pin Output diode short protection with auto-recovery

专栏文章内容及配图由作者撰写发布，仅供工程师学习之用，如有侵权或者其他违规问题，请联系本站处理。 联系我们