新闻中心

EEPW首页 > 模拟技术 > 设计应用 > 基于LTC2259-16的16位模-数转换方案

基于LTC2259-16的16位模-数转换方案

作者:时间:2010-04-12来源:网络收藏
--数转换器,适用于对高频宽动态范围的信号进行数字化.它的SNR为73.1dB,SFDR为88dB,单电源1.8V工作,功率89mW,具有CMOS, DDR CMOS 或DDR LVDS输出,可选择的输入范围从1VP-P 到 2VP-P,主要用于通信,蜂窝基站,SDR,手提医疗图像设备,多路数据采集和非破坏性测试.本文介绍了R-主要特性, 功能方框图, 采用变压器拟输入(5MHz-70MHz)电路图,以及70MHz到170MHz, 170MHz到270MHz, 大于270MHz和采用高速差分放大器的前端输入电路图, -16典型应用电路图.

The LTCR2259-16 is a sampling 16-bit A/D converter designed for digitizing high frequency, wide dynamic range signals. It is perfect for demanding communications applications with AC performance that includes 73.1dB SNR and 88dB spurious free dynamic range (SFDR). Ultralow jitter of 0.17psRMS allows undersampling of IF frequencies with excellent noise performance. DC specs include ±4LSB INL (typical) and ±0.5LSB DNL (typical).

The digital outputs can be either full-rate CMOS, doubledata rate CMOS, or double-data rate LVDS. A separate output power supply allows the CMOS output swing to range from 1.2V to 1.8V.

The ENC+ and ENCC inputs may be driven differentially or single ended with a sine wave, PECL, LVDS, TTL or CMOS inputs. An optional clock duty cycle stabilizer allows high performance at full speed for a wide range of clock duty cycles.

LTCR2259-16主要特性:

73.1dB SNR

88dB SFDR

Low Power: 89mW

Single 1.8V Supply

CMOS, DDR CMOS or DDR LVDS Outputs

Selectable Input Ranges: 1VP-P to 2VP-P

800MHz Full-Power Bandwidth S/H

Optional Data Output Randomizer

Optional Clock Duty Cycle Stabilizer

Shutdown and Nap Modes

Serial SPI Port for Configuration

40-Pin (6mm x 6mm) QFN Package

LTCR2259-16应用:

Communications

Cellular Base Stations

Software Defi ned Radios

Portable Medical Imaging

Multi-Channel Data Acquisition

Nondestructive Testing


图1.LTCR2259-16功能方框图

图2.LTCR2259-16采用变压器拟输入(5MHz-70MHz)电路图

图3.LTCR2259-16 70MHz到170MHz前端输入电路图

上一页 1 2 下一页

关键词: 2259 LTC 16

评论


相关推荐

技术专区

关闭