专栏中心

EEPW首页 > 专栏 > ZCC6303 60V宽电压输入升压芯片,恒流驱动LED芯片 兼容SY7200

ZCC6303 60V宽电压输入升压芯片,恒流驱动LED芯片 兼容SY7200

发布人:myli0104 时间:2023-03-16 来源:工程师 发布文章

ZCC6303  3.0V~60V宽电压输入升压芯片,恒流驱动LED芯片

General Description

    The ZCC6303 is a constant frequency ,mode step-up converter intended for small ,low power applications .The ZCC6303 switches at 1.2MHz and allows the use of tiny ,low cost capacitors and inductors 5mm or less in height. Internal soft-start results in small inrush current and extends battery life.

    The ZCC6303 includes under-voltage lockout ,current limiting ,and thermal overload protection to prevent damage in the event of an output overload .The ZCC6303 is available in a small 6-pin SOT-23 package.

Features

 ·3.0V to 60V Wide Input Voltage

 ·Integrated 250mΩ 60V Power MOSFET

 ·1.2MHz Fixed Switching Frequency

 ·U to 95% Step-up conversion efficiency

 ·1mA Light load model efficiency uo to 80%

 ·Low than 10uA Shutdown current

 ·Low than 0.1mA static current

 ·Built-in Cycle-by-cycle current limiting

 ·Built-in thermal shutdown protection

·Built-in under-voltage protection

·Built-in loop compensation

·Built-in soft start circuit

·Simple external

·Available in a 6-pin SOT-23 package

Applications

·Digtial Set-top Box(STB)

·Tablet Personal Computer(Pad)

·LCD Bias Supply

·Battery-Powered Equipment

·Portable Media Player(PMP)

·General Purposes

 


专栏文章内容及配图由作者撰写发布,仅供工程师学习之用,如有侵权或者其他违规问题,请联系本站处理。 联系我们

关键词: 升压

相关推荐

TI自适应降压-升压转换器:在20平方毫米面积内提供高达2.5A电流

车用启停系统电源设计

配置四开关降压-升压型µModule稳压器来适应不同应用:升压、降压或反相输出

基于 Richtek RT5047GSP 在于 LNB/LNBF 10W电源方案

一种升压芯片短路情况解决的实例讲解

Dostal的设计:以安静的方式实现降压-升压电压转换

手持式应用的电源管理和无线方案

高能效方案1

资源下载 2012-03-02

高输入电压单片开关电源采用单个电感器来实现升压和降压

资源下载 2012-04-10

电源拓扑结构详述

用于通信的高压升压和反相转换器

基于升压芯片MC34063的升压电源设计

一种19V升压芯片的选择情况

采用纤巧型SC70封装的白光LED驱动器提供了高效率和均匀的LED亮度

硬件工程师必读,如何设计电源电路?

更多 培训课堂
更多 焦点
更多 视频

技术专区