"); //-->
ZCC66099 低功耗升压芯片替代SGM66099
1.GENERAL DESCRIPTION
The ZCC66099 is a synchronous step-up converter with 0.65μA ultra low quiescent current. It is designed for products powered by alkaline battery, NiMH rechargeable battery, Li-Mn battery or rechargeable Li-Ion battery, for which high efficiency under light load
condition is critical to achieve long battery life operation.
The ZCC66099 step-up converter only consumes 0.65μA quiescent current under light load condition and can achieve up to 75% efficiency at 10μA load with fixed output voltage version. It can also support up to 300mA output current from 3.3V to 5V conversion, and achieve up to 93% efficiency at 200mA load.
The ZCC66099 also offers both down mode andpass-through operation for different applications. In down mode, the output voltage can still be regulated at target value even when input voltage is higher than output voltage. In pass-through mode, the output voltage follows input voltage. The ZCC66099 exits down mode and enters into pass-through mode when VIN > VOUT + 0.3V.
The ZCC66099 supports true shutdown function when it is disabled, which disconnects the load from the input supply to reduce the current consumption.
The ZCC66099 offers both adjustable output voltage version and fixed output voltage versions. It is available in Green WLCSP-1.22×0.83-6B and TDFN-2×2-6AL packages.
2.FEATURES
● Operating Input Voltage Range: 0.9V to 5.2V
● Ultra Low Quiescent Current
0.6µA Ultra Low IQ into VOUT Pin
0.05µA Ultra Low IQ into VIN Pin
● 1.2MHz Fixed Frequency Operation
● Adjustable Output Voltage from 2.5V to 5.2V
● Fixed Output Voltage Versions Available
● Power-Save Mode for Improved Efficiency at Low Output Power
● Regulated Output Voltage in Down Mode
● True Disconnection During Shutdown
● Up to 75% Efficiency at 10μA Load with Fixed Output Voltage Version
●Up to 93% Efficiency from 10mA to 300mA Load -40℃
Range to +85℃ Operating Ambient Temperature
● Available in Green WLCSP-1.22×0.83-6B and TDFN-2×2-6AL Packages
3.APPLICATIONS
●Memory LCD Bias
●Optical Heart Rate Monitor LED Bias
●Wearable Applications
●Low Power Wireless Applications
●Portable Products
●Battery Powered Systems
专栏文章内容及配图由作者撰写发布,仅供工程师学习之用,如有侵权或者其他违规问题,请联系本站处理。 联系我们
相关推荐
硬件工程师必读,如何设计电源电路?
使用LTC3200的升压电路(充电泵)
Dostal的设计:以安静的方式实现降压-升压电压转换
凌特新款降压升压DC/DC转换器有助延长电池寿命
求升压电路
升压式斩波型开关稳压电源原理图
使用Timer IC的升压电路
配置四开关降压-升压型µModule稳压器来适应不同应用:升压、降压或反相输出
TI自适应降压-升压转换器:在20平方毫米面积内提供高达2.5A电流
高能效方案1
一种升压芯片短路情况解决的实例讲解
用变压器升压的按摩器电路图
车用启停系统电源设计
手持式应用的电源管理和无线方案
凌特锂电池智能充电和DC-DC升压电路
基于 Richtek RT5047GSP 在于 LNB/LNBF 10W电源方案
用于通信的高压升压和反相转换器
奥地利微电子新推出200mA升压转换器
高输入电压单片开关电源采用单个电感器来实现升压和降压
采用纤巧型SC70封装的白光LED驱动器提供了高效率和均匀的LED亮度
一种19V升压芯片的选择情况
电源拓扑结构详述
怎么升压到1500V
2V,3V,100mA 1.2V升压到3.3V@100mA如何实现?
基于升压芯片MC34063的升压电源设计