专栏中心

EEPW首页 > 专栏 > 高耐压28V 线性充电 ZCC3221替代CE3221

高耐压28V 线性充电 ZCC3221替代CE3221

发布人:myli0104 时间:2021-12-22 来源:工程师 发布文章

28V 线性充电 ZCC3221替代CE3221

INTRODUCTION :

The ZCC3221 is a complete constant-current/ constant-voltage linear charger for single cell lithium rechargeable battery. No external sense resistor is needed, and no blocking diode is required due to the internal P-MOSFET architecture. Furthermore, the ZCC3221 is specifically designed to work with in USB power specifications. Its low external component count makes the ZCC3221 ideally suited for portable applications. Thermal feedback regulates the charge current to limit their temperature during high power operation or high ambient temperature. The charge current can be programmed externally with a single resistor. The ZCC3221 automatically terminates the charge cycle when the charge current drops to 1/10ththe programmed value after the final float voltage is reached. When the input supply (wall adapter or USB supply) is removed, the ZCC3221 automatically enters a low power sleep mode, dropping the battery drain current to less than 2mA.The ZCC3221 can be put into shutdown mode, reducing the supply current to 50mA.Other features include battery pack temperature monitor, under voltage lockout, automatic recharge and two status pins to indicate charging and charge termination.

FEATURES

l  Charges Single Cell Lithium Battery Directly from USB Port or ACAdapter

l  Input VoltageRangeFrom    4.5V to24V

l  InputOVP:6.5V

l  No External MOSFET, Sense Resistor or Blocking DiodeRequired

l  Preset4.20V/4.35VChargeVoltage

l  Continuous Programmable Charge Current Up to1.2A

l  Recharge Conditioning for Reviving Deeply Discharged Cells   and Minimizing  Heat Dissipation during Initial Stage ofCharge

l  Constant-Current/Constant- Voltage/Constant-Temp Operation   with ThermalRegulationtoMaximizeChargeRate Without Risk ofOverheating

l  Battery ReverseProtection

l  AutomaticRecharge

l  Battery TemperatureSensing

l  Charge state pairs of output, no battery and fault statusdisplay

l  Charge Current Monitor Output for Gas Gauging

l  Automatic Low Power Sleep Mode When Input Supply Voltage isRemoved

l  Soft-Start Limits InrushCurrent

l  Chip Enable Input


专栏文章内容及配图由作者撰写发布,仅供工程师学习之用,如有侵权或者其他违规问题,请联系本站处理。 联系我们

关键词: 充电

相关推荐

搭建智能家居与电动汽车充电之间的桥梁

宁德时代CTO:为了超充过多牺牲电池产品可靠性不可取

瑞萨零待机功耗65W USB-C适配器方案

如何使电动车电池寿命更长

铅酸蓄电池的快速充电

一个经典的锂电池充电电路

是德科技针对电子出行中兆瓦充电测试的挑战

苹果 iPhone 16 Pro Max 充电实测:日常工况下依旧只有 27W

华为快充自动充电机器人亮相:适配超充联盟所有车型,明年上半年量产

3C 认证显示苹果 iPhone 16 / Pro 系列最高支持 15V 3A 快充

Power Integrations 1700 V 开关 IC 在 800 V 电动汽车中提供可靠性和节省空间的优势

锂-离子线性电池充电控制器LTC1732及其应用

电动汽车提供乘客供电的电池充电子系统

李云飞:比亚迪兆瓦闪充、三万转电机技术过于先进 很多人不相信

小功率通信电源的控制电路

更多 培训课堂
更多 焦点
更多 视频

技术专区