适用于隔离式电源的变压器驱动器ZCC6601 替代SN6505

DESCRIPTION

The ZCC6601 is a monolithic oscillator/power-driver, specifically designed for small form factor, isolated power supplies in isolated interface applications. It drives a low-profile, center-tapped transformer primary from a 3.3 Vor 5 V DC power supply. The secondary can be wound to provide any isolated voltage based on transformerturns ratio.

The ZCC6601 consists of an oscillator followed by a gate drive circuit that provides the complementary output signals to drive the ground referenced N-channel power switches. The internal logic ensures break-before-make action between the two switches.

The ZCC6601 is available in a small SOT23-5 package, and is specified for operation at temperatures from –40°C to 125°C.

FEATURES

• Push-Pull Driver for Small Transformers

• Single 3.3 V or 5 V Supply

• High Primary-side Current Drive:

– 5 V Supply: 650 mA (max)

– 3.3 V Supply: 450 mA (max)

• Low Ripple on Rectified Output Permits Small

Output Capacitors

• Soft start and Current limit

• Thermal shutdown

• Small 5-pin SOT23 Package

• Short circuit protection

• Over temperature protection

APPLICATIONS

• Isolated Interface Power Supply for CAN, RS-

485, RS-422, RS-232, SPI, I2C, Low-Power LAN

• Industrial Automation

• Process Control

• Medical Equipment

专栏文章内容及配图由作者撰写发布，仅供工程师学习之用，如有侵权或者其他违规问题，请联系本站处理。 联系我们