"); //-->
28V 线性充电 ZCC3221替代CE3221
INTRODUCTION :
The ZCC3221 is a complete constant-current/ constant-voltage linear charger for single cell lithium rechargeable battery. No external sense resistor is needed, and no blocking diode is required due to the internal P-MOSFET architecture. Furthermore, the ZCC3221 is specifically designed to work with in USB power specifications. Its low external component count makes the ZCC3221 ideally suited for portable applications. Thermal feedback regulates the charge current to limit their temperature during high power operation or high ambient temperature. The charge current can be programmed externally with a single resistor. The ZCC3221 automatically terminates the charge cycle when the charge current drops to 1/10ththe programmed value after the final float voltage is reached. When the input supply (wall adapter or USB supply) is removed, the ZCC3221 automatically enters a low power sleep mode, dropping the battery drain current to less than 2mA.The ZCC3221 can be put into shutdown mode, reducing the supply current to 50mA.Other features include battery pack temperature monitor, under voltage lockout, automatic recharge and two status pins to indicate charging and charge termination.
FEATURES:
l Charges Single Cell Lithium Battery Directly from USB Port or ACAdapter
l Input VoltageRangeFrom 4.5V to24V
l InputOVP:6.5V
l No External MOSFET, Sense Resistor or Blocking DiodeRequired
l Preset4.20V/4.35VChargeVoltage
l Continuous Programmable Charge Current Up to1.2A
l Recharge Conditioning for Reviving Deeply Discharged Cells and Minimizing Heat Dissipation during Initial Stage ofCharge
l Constant-Current/Constant- Voltage/Constant-Temp Operation with ThermalRegulationtoMaximizeChargeRate Without Risk ofOverheating
l Battery ReverseProtection
l AutomaticRecharge
l Battery TemperatureSensing
l Charge state pairs of output, no battery and fault statusdisplay
l Charge Current Monitor Output for Gas Gauging
l Automatic Low Power Sleep Mode When Input Supply Voltage isRemoved
l Soft-Start Limits InrushCurrent
Chip Enable Inpu
专栏文章内容及配图由作者撰写发布,仅供工程师学习之用,如有侵权或者其他违规问题,请联系本站处理。 联系我们
相关推荐
罗姆高集成度电机驱动实现高耐压高能效
RGS系列:低传导损耗、高耐压的车载IGBT
请帮忙推荐高耐压、微小电流的电磁继电器?
开发的关键词为“80V高耐压”“高效率”“高可靠性”“小型”
常用大功率高耐压场效应管参数
兼顾高耐压与低Vce性能的650V沟槽IGBT受热捧
常用大功率高耐压场效应管参数
有高耐压16V以上能代替asm1117的LDO芯片吗?
高耐压PWM三端开关电源电路图及其解析
所谓MOSFET-高耐压超级结MOSFET的种类与特征