Features

 USB Type-C Downstream Facing Port(DFP)  Support PD2.0,PD3.0 (TID: 4827)  Support BC1.2 DCP, Apple2.4A, QC2.0 and QC3.0  Built-in shunt regulator for constant voltage and constant current control  Built-in MCU and flash controller  Programmable cable compensation  Built-in discharge MOS  Driver for NMOS load switch  Power saving mode in standby mode  PDO selection by external resistor  CC1/CC2/DP/DM over voltage protection  Protection: OVP/UVP/OCP/OTP etc.  Package: QFN-16, 4mm×4mm

Description 

The ZCC2404 is a highly integrated USB PD controller that supports PD3.0 and Qualcomm® Quick Charge™ QC2.0, QC3.0. It is design for USB DFP (Source) charging applications such as power adapters, car chargers and etc. The ZCC2404 built-in two high-precision DACs and shunt regulators to provide high-precision VBUS output and CV/CC control. It minZCCizes external components and saves BOM cost by integrating BMC PHY, Type-C detection, voltage and current monitors, output bleeding circuit, load-switch NMOS gate driver and system ESD design. The ZCC2404 also provides comprehensive protections such as over voltage protection (OVP), under voltage protection (UVP), over temperature protection (OTP), over current protection (OCP) etc. The ZCC2404 is available in QFN16 package

专栏文章内容及配图由作者撰写发布，仅供工程师学习之用，如有侵权或者其他违规问题，请联系本站处理。 联系我们