新闻中心

EEPW首页 > 电源与新能源 > 设计应用 > 采用dsPIC33F和PIC24H的Microstick开发方案设计

采用dsPIC33F和PIC24H的Microstick开发方案设计

作者: 时间:2012-05-31 来源:网络 收藏

The for and devices is designed to provide designers with an easy to use, economical development environment for 16-bit Digital Signal Controllers and Microcontrollers.

provides all you need to get started at a very low cost. It has an integrated programmer / debugger. It can be used stand-alone or plugged into a prototyping board for extremely flexible development. The device under test is socketed for easy change-out, and Microchip’s MPLAB Integrated Development Environment supports . It has never been more affordable to get started with Microchip 16-bit devices!

板Microstick主要特性:

Low Cost – Priced at $24.99 at Microchip Direct

Integrated USB programmer / debugger – No external debugger required

USB Powered – Ease of use, No external power required

Socketed dsPIC/PIC24 – Flexible, Easy device replacement

0.025” Pin headers – Enables plug-in to Breadboard with room for jumper wires

Easy access to all device signals for probing

Small size - Smaller than a stick of gum at 20 x76mm – Easily Portable

On board debug LED, Utility LED and Reset Switch

Free demo code


图3。板Microstick电路图

本文引用地址:https://www.eepw.com.cn/article/177084.htm
上一页 1 2 下一页

评论


相关推荐

技术专区

关闭