新闻中心

EEPW首页 > 电源与新能源 > 设计应用 > 基于NCL30000设计的中小型开关电源

基于NCL30000设计的中小型开关电源

作者: 时间:2010-05-07 来源:网络 收藏


图4 宽输入4-15 个LED 350mA应用电路图

This is a single stage power factor corrected TRIAC dimmable isolated flyback LED driver intended for lighting applications such as down lights, PAR lamps and residential/commercial LED fixtures. The is based on a fixed on-time, critical conduction mode (CrM) flyback topology. The board is designed to provide 350 mA of constant current and drive up to 15 W of LEDs in a single string. Closed loop regulation of the LED current is achieved which results in accurate current regulation across a range of LEDs. This board is specifically designed to support an input line voltage range of 180-265 Vac.

The design is power factor corrected with a nominal PF of >0.96. Triac dimming is preconfigured to drive 12 white LEDs at 350 mA from 230 Vac. For optimal dimming performance, a single capacitor can be adjusted to match other numbers of LEDs. The board can support from 4-15 LEDs in series.


图5。LED2GEVB评估板外形图

图6。LED2GEVB评估板电路图

NCL30000LED2GEVB评估板材料清单(BOM):

本文引用地址:https://www.eepw.com.cn/article/180865.htm

上一页 1 2 下一页

评论


相关推荐

技术专区

关闭