安科瑞 梅岑彬 18761500144

1. 摘要 Abstract:

本文介绍了霍尔传感器在印度尼西亚的应用。霍尔电流传感器主要用于隔离和转换交流、直流、脉冲等复杂信号。根据霍尔效应理论对电流信号进行信号控制转换后，可直接被AD、DSP、PLC、二次仪表等设备获取。霍尔电流传感器广泛适用于电流监测、电池应用、逆变器、太阳能发电等领域的采集和反馈管理、直流柜、直流电机驱动、电镀、焊接、变频器、UPS伺服控制系统。具有响应快、测量范围广、过载能力强、线性度好、抗干扰性能好等特点。

This  article introduces the application of the Hall Sensor used  in Indonesia. Hall current sensors are mainly used to isolate and  convert AC, DC, pulse and other complex signals. After signal control of  current signals are converted according to the Hall Effect Theory, they  can be directly acquired by AD, DSP, PLC, secondary instruments and  other devices. Hall current sensors are widely applicable for  acquisition and feedback in the current monitoring, battery application,  inverter, solar power management, direct current cabinet, DC motor  drive, electroplating, welding, frequency converter, UPS servo control  systems. They feature the quick response, wide range of measurement,  high precision, strong overload capacity, good linearity and excellent  anti-interference performance.

2. 项目概述 Project overview:

做交通信号灯系统的印尼公司，需要使用直流霍尔传感器将直流电流传输到4-20mA模拟信号输出。客户在选择开孔尺寸、输入比、输出比和工作电源后，选择了AHKC-EKAA。

The  company in Indonesia who make the traffic light system and need to use  DC hall sensor to transmitter the DC current to 4-20mA analog signal  output. After they choose the hole size, input ratio, output ratio and  working power supply, the customer chosen the AHKC-EKAA as their best  choice.

3. 分类Classification

霍尔传感器按原理分为三类：开环霍尔电流传感器、闭环霍尔电流传感器、霍尔电压传感器。

Hall  sensors are divided into three categories according to the principle:  open loop Hall current sensor, closed loop Hall current sensor, Hall  voltage sensor.

4. 应用Application

光伏Photovoltaic

UPS

太阳能，风能Solar and wind energy

电焊机Electric welding machine

电机系统Motor servo system

整流器Rectifier

5. 主要功能Main Functions

6. 现场安装图Photos on site

专栏文章内容及配图由作者撰写发布，仅供工程师学习之用，如有侵权或者其他违规问题，请联系本站处理。 联系我们