"); //-->
wallys IPQ4019 openWRT 802.11ac 2.4/5G dual bands
Featuring withindustrial-grade IPQ4019 chipset
Integrated with 2x 2 5G high power
Radio module and 2x2 2.4G high power Radio module
Support 5.180GHz to5.825GHz Frequency Range;
Support 2.412GHz to 2.482GHz
Support 2 x 5G MMCX Connectors and 2x2.4G MMCX
20MHz/40MHz/80MHz Bandwidth
Support 11ABGN/802.11AC
RoHS compliance ensure a high level
protection of human health and the environment from risks that can be posed by
| Absolute Maximum Rating |
Parameter | Rating | Unit |
Supply Voltage | 24V~48 | V |
Operating Temperature Range | -40 to +70 | ºC |
Storage Temperature Range | -45 to +105 | ºC |
Operating Humidity Range | 5 to +95 (non-condensing) | % |
Storage Humidity Range | 0 to +90 (non-condensing) | % |
| Hardware Specifications |
Symbol | Parameter |
CPU | IPQ4019(Quad core ARM Cortex A7 at 716.8 MHz) |
Antenna Connector | 2 x 5G MMCX connectors;2x2.4G MMCX |
10/100/1000Mbps |
2xRJ45 |
DC Jack | 12 power supply |
ROHS Compliance | YES |
Dimension | 65mmx35mm x 16mm |
Max Power | 12V x 0.8A= 9.6W |
Nor Flash | 32MB |
DDR | 256MB |
Radio TX Specifications(5180MHz-5825MHz) |
Operating Mode | Data Rate | Power | Tolerance | |
1 Chain | 2 Chains | |||
802.11a | 6 Mbps | 26dBm | 29dbm | ±2dB |
54 Mbps | 22dBm | 25dbm | ±2dB | |
802.11n HT20 | MCS0, MCS8 | 26dBm | 29dbm | ±2dB |
MCS7, MCS15 | 22dBm | 25dbm | ±2dB | |
802.11n HT40 | MCS0, MCS8 | 25dBm | 28dbm | ±2dB |
MCS7, MCS15 | 21dBm | 24dbm | ±2dB | |
802.11ac | MCS0, MCS10,MCS20 | 25dBm | 28dbm | ±2dB |
MCS9,MCS19,MCS29 | 19dBm | 22dbm | ±2dB | |
Radio RX Specifications(5180MHz-5825MHz) |
Operating Mode |
Data Rate |
Sensitivity |
802.11a
| 6 Mbps | -92dBm |
54 Mbps | -74dBm | |
802.11n HT20
| MCS0, MCS8 | -91dBm |
MCS7, MCS15 | -72dBm | |
802.11n HT40
| MCS0, MCS8 | -90dBm |
MCS7, MCS15 | -70dBm | |
802.11AC HT40
| MCS0, MCS10,MCS20 | -90dBm |
MCS9,MCS19,MCS29 | -67dBm | |
802.11AC HT80
| MCS0, MCS10,MCS20 | -88dBm |
MCS9,MCS19,MCS29 | -62dBm |
Radio TX Specifications(2412MHz-2482MHz) |
Operating Mode
| Data Rate
| Power | Tolerance
| |
1 Chain | 2 Chains | |||
802.11g
| 6 Mbps | 25dbm | 28dbm | ±2dB |
54 Mbps | 22dbm | 25dbm | ±2dB | |
802.11n HT20
| MCS0, MCS8 | 25dbm | 28dbm | ±2dB |
MCS7, MCS15 | 21dbm | 24dbm | ±2dB | |
802.11n HT40
| MCS0, MCS8 | 25dbm | 28dbm | ±2dB |
MCS7, MCS15 | 21dbm | 24dbm | ±2dB | |
Radio RX Specifications(2412MHz-2482MHz) |
Operating Mode |
Data Rate |
Sensitivity |
802.11g
| 6 Mbps | -91dBm |
54 Mbps | -73dBm | |
802.11n HT20
| MCS0, MCS8 | -90dBm |
MCS7, MCS15 | -72dBm | |
802.11n HT40
| MCS0, MCS8 | -90dBm |
MCS7, MCS15 | -70dBm |
Pin number | signal | Pin number | signal | Pin number | signal |
1 | GND | 36 | GND | 54 | GND |
2 | GND | 37 | GND | 55 | P4_TRX2+ |
3 | GND | 38 | GND | 56 | P4_TRX2- |
4 | GND | 39 | GND | 57 | P4_TRX3+ |
5 | GND | 40 | GND | 58 | P4_TRX3- |
6 | GND | 41 | P3_TRX0+ | 59 | GND |
7 | GND | 42 | P3_TRX0- | 60 | P4_1000_LED |
8 | GND | 43 | P3_TRX1+ | 61 | 2G_LINK_LED_1P8 |
9 | GND | 44 | P3_TRX1- | 62 | GND |
10 | GND | 45 | P3_TRX2+ | 63 | GND |
11 | GND | 46 | P3_TRX2- | 64 | USB3_SS_TX_P |
12 | GND | 47 | P3_TRX3+ | 65 | USB3_SS_TX_N |
13 | GND | 48 | P3_TRX3- | 66 | USB3_SS_RX_P |
14 | GND | 49 | P4_TRX0+ | 67 | USB3_SS_RX_N |
15 | GND | 50 | P4_TRX0- | 68 | USB3_HS_DP |
16 | GND | 51 | P4_TRX1+ | 69 | USB3_HS_DM |
17 | GND | 52 | P4_TRX1- | 70 | GND |
18 | GND | 53 | GND | 71 | 2G_STRENGTH_LED |
19 | GND | 72 | GND | ||
20 | GND | 73 | GND | ||
21 | GND | 74 | GND | ||
22 | GND | 75 | GND | ||
23 | GND | 76 | GND | ||
24 | GND | 77 | GND | ||
25 | GND | 78 | GND | ||
26 | GND | 79 | 12V | ||
27 | GND | 80 | 12V | ||
28 | GND | 81 | GND | ||
29 | GND | 82 | GND | ||
30 | software reset | 83 | GND | ||
31 | GND | 84 | GND | ||
32 | 3.3V | 85 | GND | ||
33 | Uart TX | 86 | GND | ||
34 | Uart RX | 87 | GND | ||
35 | GND | 88 | GND |
Note:
1) Pin41-Pin48 indicates the differential signals of network port 1, which are 0,1,2, and 3 in sequence
2) Pin48 to Pin52, P55 to Pin58 indicates the differential signals of network port 2. The sequence is differential signals 0,1,2, and 3
The schematic diagram of the extended circuit is as follows:
3) Pin64-Pin69 indicates the differential signals of USB3.0 are TX, RX, and HS in sequence
The schematic diagram of the extended circuit is as follows:
4) Pin 79,80 is a 12V input power signal and the input voltage is in the range of 11v-13v
5) Pin32 -Pin35 indicates the serial port signal, Pin32 indicates the output 3.3V, Pin33, and Pin34 indicates the output input signal
The schematic diagram of the extended circuit is as follows,

Wallys Communications (Suzhou) Co LTD develops, designs and manufactures wireless communication products, including routers, network cards, AP and antennas. Customization is also supported, The market is global, We're a supplier to Facebook. welcome to consult. (Web:wallystech com)
EMAIL:sales@wallystech.com
WEB:https://www.wallystech.com/

专栏文章内容及配图由作者撰写发布,仅供工程师学习之用,如有侵权或者其他违规问题,请联系本站处理。 联系我们
相关推荐
SH-802多种闪光花样彩灯伴迪斯科乐曲控制电路
基于802.15.4/ZigBee无线传感器网络节点的物理层设计原理图
Imagination推出专为低功耗应用而设计的第二代IEEE 802.11n Wi-Fi硅知识产权(IP)产品
SH-802多种闪光花样彩灯伴吉庆鼓声控制电路
WiMAX算法结构分析与系统平台设计
首款802.11a/b自适应无线网卡亮相
新一代以太网供电
四路闪烁灯串电路(7)(SH-802)
[求助]哪位有IEEE 802.3的中文资料?
贸泽供应适用于Matter IoT应用的模组
以太网协议标准 IEEE 802.3(2000年最新版)
为与苹果智能眼镜兼容 iPhone 12 或采用新WiFi标准
TWR-WIFI-G1011MI的802.11b Wi-Fi应用电路
IEEE 802.11标准
Wi-Fi技术的演进
八晶体管三波段收音机-熊猫牌B-802-1型收音机
一种大带宽高阶调制802.11ax信号高精度分析算法研究
紧急求助: COS 802.1P
蓝牙无线通讯协议V1.1
物联网产品设计中Wi-Fi连接的四个关键因素
POE网口供电设备的负载装置实现方法
紧急求助:COS 802.1p
IEEE 802.11ah集Wi-Fi和LPWAN之长
恩智浦推出OpenWRT智能网络解决方案,赋能全新的下一代网络!
Ceva低功耗蓝牙和802.15.4 IP为Alif Semiconductor的Balletto系列MCU带来超低功耗无线连接能力
求教:基于802.11的嵌入式无线通信网络系统开发环境和所需设备