新闻中心

EEPW首页 > 模拟技术 > 设计应用 > 接收器IC混合式混频器、频率合成器和IF放大器

接收器IC混合式混频器、频率合成器和IF放大器

作者:ADI时间:2018-09-26来源:电子产品世界收藏

  致谢

本文引用地址:http://www.eepw.com.cn/article/201809/392311.htm

  随着完整接收器链内在集成度的提高,开发团队的规模也大幅增加。虽然这里无法列出为本文做出贡献的全体人员,但本文作者非常荣幸地向下列行业专家表示由衷的谢意:Kurt Fletcher和Dominic Mai花了大量时间以实现优秀的布局并保持对称,避免无用耦合。Vincent Bu与我们的供应商密切配合,开发必要的封装。Susan Stevens与外部代工合作伙伴维持了良好的工作关系。Craig Levy和Rachana Kaza为这些器件开发了生产测试功能。Wendy Dutile、Ed Gorzynski和Chris Norcross都参与了测试电路的大量原型制作工作。Mark Hyslip负责业务协调,使得本项目得以成型。本文作者希望以本文纪念我们的同事,Edward J. Gorzynski。

  参考文献

  1 Marc Goldfarb, Russel Martin, and Ed Balboni.“Novel Topology Supports Wideband Passive Mixers.”(新型拓扑结构支持宽带无源混频器)Microwaves & RF,第90页,2011年10月。

  2 Marc Goldfarb.“Apparatus and Method for a Wideband RF Mixer.”(宽带RF混频器装置和方法)公司,2012年。

  数据手册。公司,2016。

  ADRF6614数据手册。公司,2016。

  About the Authors

  作者简介

  Tom Bosia [thomas.bosia@analog.com] joined ADI in 2013 as an RF product engineer. Prior to Analog Devices, he was an RF test engineer at Raytheon, Cree, and Auriga Microwave, accruing over 25 years of experience in microwave semiconductors. He received a B.S.E.E. from UMass Lowell in 2001.

  Tom Bosia [thomas.bosia@analog.com]于2013年加盟ADI公司,担任RF产品工程师。加盟ADI公司之前,在Raytheon、Cree和Auriga Microwave等公司担任RF测试工程师,在微波半导体领域积累了超过25年的经验。2001年获得麻省大学罗威尔分校电气工程学士学位。

  Russell Martin [russell.martin@analog.com] joined ADI in 2002 and had 15 years of experience releasing IC products to market as a product engineer before becoming engineering manager in the RF and Microwave Group (RFMG). He graduated from Worcester Polytechnic Institute in 2002 with a B.S.E.E.

  Russell Martin [russell.martin@analog.com]于2002年加盟ADI公司,任产品工程师,负责IC产品的市场发布工作达15年;后来成为ADI公司RF和微波部门(RFMG)的工程经理。2002年毕业于伍斯特理工学院,获电气工程学士学位。

  Marc Goldfarb [marc.goldfarb@analog.com] has over 35 years of design experience in analog, RF, and microwave integrated circuits in military, industrial, and consumer applications. He has worked in SiGe/silicon, GaAs, and microwave hybrid integrated circuit technologies, among others. Prior to joining Analog Devices, Marc held engineering roles at Pacific Communications Sciences, Inc. (PCSI), Raytheon, and M/A-COM Microwave Associates. He holds a Master of Engineering degree from Rensselaer Polytechnic Institute in Troy, NY, has 13 patents, and has authored numerous publications for reference and trade journals.

  Marc Goldfarb [marc.goldfarb@analog.com]在模拟、RF和微波集成电路领域拥有超过35年的设计经验,涉及军事、工业和消费电子等应用。他曾从事过SiGe/硅、GaAs和微波混合集成电路技术等工作。加盟ADI公司之前,Marc曾在Pacific Communications Sciences, Inc. (PCSI)、Raytheon和M/A-COM Microwave Associates公司工作,历任多个工程职位。他毕业于纽约特洛伊伦斯勒理工学院,获工程硕士学位;获13项专利,在参考类资料和行业期刊上发表论文多篇。

  Marc is a design engineer with the RF and Microwave Group (RFMG) focused on the development of RF ICs for the wireless infrastructure and is presently leading the design team for a series of 5th generation communications infrastructure (5G IC) projects.

  Marc目前是RF和微波部门(RFMG)的一名设计工程师,主要负责无线基础设施RF IC开发工作;目前担任多个5G通信基础设施(5G IC)项目的设计组组长。

  Dragoslav Culum [dragoslav.culum@analog.com] is a product line manager at Analog Devices. He has over 10 years of experience in wireless communications. Dragoslav joined Analog Devices in 2014 through the Hittite acquisition. He joined Hittite in 2008 and since then has held various positions including applications engineer, marketing engineer, and product line manager in a number of product lines. Dragoslav obtained his Bachelor of Engineering from McMaster University and a Master of Engineering from Carleton University.

  Dragoslav Culum [dragoslav.culum@analog.com]是ADI公司的产品线经理。他在无线通信领域拥有超过10的工作经验。2014年,在Hittite并购完成后,Dragoslav加盟ADI。他于2008年加盟Hittite,并历任多个职位,包括应用工程师、营销工程师和多个产品系列的产品线经理。Dragoslav分别从麦克马斯特大学和卡尔顿大学获工程学士学位和工程硕士学位。

  Ben Walker [benjamin.walker@analog.com] received his Bachelor of Engineering and Master of Engineering degrees from the Massachusetts Institute of Technology, in 2003 and 2004, respectively. Since 2004, he has worked for Analog Devices, Inc., in the RF and Microwave Group on a variety of circuits for the wireless infrastructure market. Ben’s interests include phase-locked loops, voltage-controlled oscillators, and RF switch and attenuator design.

  Ben Walker [benjamin.walker@analog.com]于2003年和2004年分别获得麻省理工学院的工程学士学位和工程硕士学位。2004年以来,他一直在ADI公司RF和微波部门工作,参与了面向无线基础设施市场的多种电路设计工作。Ben的兴趣包括锁相环、电压控制振荡器和RF开关及衰减器设计。

  Ed Balboni [ed.balboni@analog.com] has 30 years’ experience designing high performance, highly integrated, radio transceiver circuits. His expertise is in microwave, RF, mixed-signal, and analog circuits in SiGe BiCMOS, bipolar, and CMOS technologies for communication products. Ed joined Analog Devices in 2000 and works in the RF IC Design Group as an IC designer and design manager. At ADI he develops high performance RF IC components supporting wireless infrastructure including cellular base stations and point-to-point microwave.

  Ed Balboni [ed.balboni@analog.com]在高性能、高集成度无线电收发器电路设计领域拥有30年经验。他擅长基于SiGe BiCMOS、双极性和CMOS技术设计面向通信产品的微波、RF、混合信号和模拟电路。Ed于2000年加盟ADI公司,在RF IC设计部门担任IC设计师和设计经理。他在ADI负责开发支持无线基础设施的高性能RF IC组件,包括蜂窝基站和点对点微波。

  Prior to joining ADI, Ed worked at Draper Laboratory in Cambridge, MA on MEMS inertial sensors and low power communication electronics. Ed graduated from University of Massachusetts Lowell with a B.S.E.E. degree in 1985 and received a M.S.E.E. degree in 1990 from Northeastern University.

  加盟ADI之前,Ed曾在麻省剑桥的Draper实验室工作,负责MEMS惯性传感器和低功耗通信电子元器件的设计。Ed 1985年毕业于麻省大学洛威尔分校,获电气工程学士学位,1990年毕业于东北大学,获电气工程硕士学位。


上一页 1 2 3 下一页

关键词: ADI ADRF6612

评论


相关推荐

技术专区

关闭