新闻中心

EEPW首页 > 嵌入式系统 > 设计应用 > 基于S3C44BOX的嵌入式磨削数控系统

基于S3C44BOX的嵌入式磨削数控系统

作者:时间:2017-06-06来源:网络收藏
Abstract: This paper presents an embedded numerical control system of grinder,including its design of hardware and software. The controller is S3C44BOX, the operating system is uC/OS-II, the machining-information is transferred by USB flash disk, the motor is controlled by PWM mode, the system information is displayed by LCD displayer in the proposed system. It has many advantages such as higher control accuracy, lower cost, smaller volume etc., and meanwhile it is extended and upgraded easily . It befits the reconstruction for traditional machine tool, and also befits the development for economical numerical control system.

Keyword:numerical control system of grinder,embedded system,S3C44BOX Micro Processor Unit,uC/OS-II operating system,controlled by PWM mode

本文阐述了一个嵌入式磨削数控系统,包括系统硬件设计和软件设计。该系统以S3C44BOX为器,以uC/OS-II为操作系统,以U盘进行加工信息的离线传输,以PWM方式进行电机,以LCD显示器进行显示,具有精度高,成本低,体积小,易于扩展和升级等特点,是传统机床的数控化改造和经济型数控机床开发的发展趋势。

关键字:;PWM控制
点击此处下载


评论


相关推荐

技术专区

关闭